華秀塑膠為您提供詳細的Lexan PC HPS4物性表參數。
想了解更多的與Lexan PC HPS4相關的物性參數，請點擊 LEXAN™ PC產品列表。
如果您對我們的Lexan PC HPS4有任何疑問，或者想索取Lexan PC HPS4 物性表datasheet、物質安全資料證書MSDS、ROHS檢驗報告、SGS報告、REACH環保證明、FDA證明、EU法規證明、UL證書及出廠證明COC/COA報告等，敬請撥打我們的服務熱線 020-82582555，或者點擊 聯系我們 給我們留言。
Lexan PC HPS4 Physical property
| General Information | ||||
| Product Description | ||||
|
中等黏度,醫療級. | ||||
| General | ||||
| Material Status |
| |||
| Availability |
| |||
| Additive |
| |||
| Features |
| |||
| Uses |
| |||
| Agency Ratings |
| |||
| Forms |
| |||
| Processing Method |
| |||
| ASTM and ISO Properties 1 | |||
| Physical |
Nominal Value |
Unit |
Test Method |
| Specific Gravity |
1.19 |
|
ASTM D792 |
| Density |
1.19 |
g/cm³ |
ISO 1183 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) |
11 |
g/10 min |
ASTM D1238 |
| Melt Volume-Flow Rate (MVR) (300°C/1.2 kg) |
0.610 |
in³/10min |
ISO 1133 |
| Molding Shrinkage - Flow |
|
ASTM D955 | |
|
-- |
0.0050 to 0.0070 |
in/in |
|
|
0.126 in |
0.0050 to 0.0070 |
in/in |
|
| Molding Shrinkage - Across Flow (0.126 in) |
0.0050 to 0.0070 |
in/in |
ASTM D955 |
| Water Absorption (24 hr) |
0.14 |
% |
ASTM D570 |
| Water Absorption (Saturation, 73°F) |
0.26 |
% |
ISO 62 |
| Water Absorption (Equilibrium, 73°F, 50% RH) |
0.10 |
% |
ISO 62 |
| Mechanical |
Nominal Value |
Unit |
Test Method |
| Tensile Modulus 2 |
334000 |
psi |
ASTM D638 |
| Tensile Modulus |
347000 |
psi |
ISO 527-2/1 |
| Tensile Strength 3 (Yield) |
8990 |
psi |
ASTM D638 |
| Tensile Stress (Yield) |
8850 |
psi |
ISO 527-2/50 |
| Tensile Strength 3 (Break) |
10700 |
psi |
ASTM D638 |
| Tensile Stress (Break) |
10600 |
psi |
ISO 527-2/50 |
| Tensile Elongation 3 (Yield) |
6.5 |
% |
ASTM D638 |
| Tensile Strain (Yield) |
6.0 |
% |
ISO 527-2/50 |
| Tensile Elongation 3 (Break) |
140 |
% |
ASTM D638 |
| Tensile Strain (Break) |
130 |
% |
ISO 527-2/50 |
| Flexural Modulus 4 (1.97 in Span) |
348000 |
psi |
ASTM D790 |
| Flexural Modulus 5 |
326000 |
psi |
ISO 178 |
| Flexural Strength 5, 6 |
13500 |
psi |
ISO 178 |
| Flexural Strength 4 (Yield, 1.97 in Span) |
14500 |
psi |
ASTM D790 |
| Impact |
Nominal Value |
Unit |
Test Method |
| Charpy Notched Impact Strength |
|
||
|
73°F |
39.0 |
ft·lb/in² |
ISO 179/2C |
|
73°F 7 |
33.3 |
ft·lb/in² |
ISO 179/1eA |
|
-22°F 7 |
7.14 |
ft·lb/in² |
ISO 179/1eA |
| Charpy Unnotched Impact Strength 7 |
|
ISO 179/1eU | |
|
-22°F |
No Break |
|
|
|
73°F |
No Break |
|
|
| Notched Izod Impact |
|
ASTM D256 | |
|
-22°F |
4.12 |
ft·lb/in |
|
|
73°F |
15.7 |
ft·lb/in |
|
| Notched Izod Impact Strength 8 |
|
ISO 180/1A | |
|
73°F |
33.3 |
ft·lb/in² |
|
|
-22°F |
4.76 |
ft·lb/in² |
|
| Unnotched Izod Impact Strength 8 |
|
ISO 180/1U | |
|
-22°F |
No Break |
|
|
|
73°F |
No Break |
|
|
| Instrumented Dart Impact (73°F, Total Energy) |
779 |
in·lb |
ASTM D3763 |
| Thermal |
Nominal Value |
Unit |
Test Method |
| Deflection Temperature Under Load (66 psi, Unannealed, 0.252 in) |
280 |
°F |
ASTM D648 |
| Deflection Temperature Under Load |
|
ASTM D648 | |
|
264 psi, Unannealed,
0.252 in |
270 |
°F |
|
|
264 psi, Unannealed,
0.126 in |
259 |
°F |
|
| Heat Deflection Temperature 9 (264 psi, Unannealed, 3.94 in Span) |
261 |
°F |
ISO 75-2/Ae |
| Vicat Softening Temperature |
289 |
°F |
ASTM D1525 10 |
| Vicat Softening Temperature |
|
||
|
-- |
289 |
°F |
ISO 306/B50 |
|
-- |
293 |
°F |
ISO 306/B120 |
| CLTE - Flow (-40 to 104°F) |
0.000043 |
in/in/°F |
ASTM E831 |
| CLTE - Flow (-40 to 104°F) |
0.000043 |
in/in/°F |
ISO 11359-2 |
| CLTE - Transverse (-40 to 104°F) |
0.000042 |
in/in/°F |
ASTM E831 |
| CLTE - Transverse (-40 to 104°F) |
0.000042 |
in/in/°F |
ISO 11359-2 |
| Ball Pressure Test (257°F) |
Pass |
|
IEC 60695-10-2 |
| Processing Information | |||
| Injection |
Nominal Value |
Unit |
|
| Drying Temperature |
248 |
°F |
|
| Drying Time |
2.0 to 4.0 |
hr |
|
| Suggested Max Moisture |
0.020 |
% |
|
| Hopper Temperature |
140 to 176 |
°F |
|
| Rear Temperature |
500 to 536 |
°F |
|
| Middle Temperature |
518 to 554 |
°F |
|
| Front Temperature |
536 to 590 |
°F |
|
| Nozzle Temperature |
518 to 554 |
°F |
|
| Processing (Melt) Temp |
536 to 590 |
°F |
|
| Mold Temperature |
176 to 230 |
°F |
|
- Physical properties of related products: HP2C HP4R HP1 HP1R HP1NREU HPS6 HPS6R HPX8R HPX4R HPX4 HP6NR HP6 HP6REU HP3NREU HPB3144G HPH4404 HP8REU HPH4504 HPH4504H HP9NR HPH4704 HPXS8R HPS1S HPS2S HP4 HP4NR HP2EU HP2REU HP2R HP2 HU1000E HP4REU
Correlation search: HPS4-111 HPS4-701 HPS4-BK1066 HPS4-NA Lexan HPS4 HPS4物性 Sabic HPS4 GE HPS4 PC HPS4 PC 物性 PC 塑膠原料 PC 工程塑料 PC 塑料
廣州華秀塑膠有限公司不僅是專業的Lexan PC HPS4原料供應商，亦注重技術支持及全方位的解決方案，提供從材料鑒定、模具設計、成型加工等系列幫助，亦可為客戶量身定制各特殊性能之Lexan PC HPS4材料，進而協助客戶提高產品竟爭力。
地址:廣州市天河區中山大道中439號東圃天銀商貿大廈1720-1723室
電話:020-82582555
傳真:020-82523699
Email: [email protected]
Lexan PC HPS4報價 >>
常規產品
長纖增強尼龍6 長纖增強PP
長纖增強復合材料 沖擊改性復合尼龍66
沖擊改性復合尼龍6 高強尼龍
沖擊改性復合尼龍 沖擊改性復合材料
改性PP 改性的合金料
高溫改性塑料 含氟聚合物
改性POM 改性PBT
改性PC 焊接用復合塑料
高比重復合塑料 永久防靜電塑料
永久防靜電ABS 永久防靜電合金
永久防靜電POM 其他導電材料
導電尼龍 導電PE,導電PP
高溫導電塑料 導電POM
導電PBT 導電PC
其他非PTFE自潤滑塑料 非PTFE自潤滑PA
非PTFE自潤滑聚苯醚 非PTFE自潤滑PPA
非PTFE自潤滑聚甲醛 非PTFE自潤滑聚碳酸酯
其他潤滑塑料 潤滑尼龍
潤滑烯烴 潤滑PPO(PPE+PS)
耐熱潤滑塑料 潤滑POM
潤滑PBT 潤滑彈性體
潤滑PC 擠出PBT
熱傳導復合塑料 其他PC
EMI/RFI屏蔽復合塑料 預著色非填充樹脂
熱門工程塑膠原料
DX02728C GX05482 MV00ASU AF002L RF006 KB008 ZF006 Noryl_HMC3008A KP004AXZ MF004SU WBL36L KP004AXC 943 GFL14 KF002XXP NORYL™ PPO LEXAN™ PC VALOX™ PBT ULTEM™ PEI CYCOLOY™ PC/ABS XYLEX™ PC/PET XENOY™ PC/PBT/PET Noryl GTX PPE/PA CYCOLAC™ ABS GELOY™ ASA Colorcomp Faradex Konduit Lubricomp Lubriloy Stat-kon Stat-loy Thermocomp Thermotuf Verton