華秀塑膠為您提供詳細的Noryl PPO WCD801A物性表參數。
想了解更多的與Noryl PPO WCD801A相關的物性參數，請點擊 NORYL™ PPO產品列表。
如果您對我們的Noryl PPO WCD801A有任何疑問，或者想索取Noryl PPO WCD801A 物性表datasheet、物質安全資料證書MSDS、ROHS檢驗報告、SGS報告、REACH環保證明、FDA證明、EU法規證明、UL證書及出廠證明COC/COA報告等，敬請撥打我們的服務熱線 020-82582555，或者點擊 聯系我們 給我們留言。
[下載WCD801A物性表PDF] 
Consult WCD801A
Noryl PPO WCD801A Physical property
柔軟,非鹵化阻燃PPE-TPE擠出級,低比重,硬度80,導線絕緣材料和外殼應用.
Property
| TYPICAL PROPERTIES (1) | ||||
|
MECHANICAL |
Value | Unit | Standard | |
|
Tensile Stress, brk, Type I, 50 mm/min |
120 |
kgf/cm2 |
ASTM D 638 | |
|
Tensile Strain, brk, Type I, 5 mm/min |
120 |
% |
ASTM D 638 | |
|
Flexural Modulus, 12.5 mm/min, 100 mm span |
800 |
kgf/cm2 |
ASTM D 790 | |
|
Hardness, Shore A, 30S reading |
80 |
- |
ASTM D 2240 | |
|
Tensile Stress, break, 50 mm/min |
13 |
MPa |
ISO 527 | |
|
Tensile Strain, break, 50 mm/min |
119 |
% |
ISO 527 | |
|
Flexural Modulus, 12.5 mm/min |
90 |
MPa |
ISO 178 | |
|
IMPACT |
Value | Unit | Standard | |
|
Brittleness Temperature |
<-40 |
°C |
ASTM D 746 | |
|
PHYSICAL |
Value | Unit | Standard | |
|
Specific Gravity |
1.1 |
- |
ASTM D 792 | |
|
Melt Flow Rate, 250°C/5.0 kgf |
11 |
g/10 min |
ASTM D 1238 | |
|
ELECTRICAL |
Value | Unit | Standard | |
|
Volume Resistivity |
3.8E+15 |
Ohm-cm |
IEC 60093 | |
|
Dielectric strength in oil, 2.0mm |
23 |
kV/mm |
IEC 60243-1 | |
|
Relative Permittivity, 50/60 Hz |
2.8 |
- |
IEC 60250 | |
|
Relative Permittivity, 1 MHz |
2.8 |
- |
IEC 60250 | |
|
Dissipation Factor, 50/60 Hz |
0.03 |
- |
IEC 60250 | |
|
Dissipation Factor, 1 MHz |
0.004 |
- |
IEC 60250 | |
|
Comparative Tracking Index |
600 |
V |
IEC 60112 | |
|
FLAME CHARACTERISTICS |
Value | Unit | Standard | |
|
UL Recognized, 94V-0 Flame Class Rating (3) |
4 |
mm |
UL 94 | |
|
Smoke Density on 0.5mm plaque, Non-flame, Ds, max |
95 |
- |
ASTM E 662 | |
|
Smoke Density on 0.5mm plaque, Flame, Ds, max |
142 |
- |
ASTM E 662 | |
|
Glow Wire Flammability Index 650°C, passes at |
3 |
mm |
IEC 60695-2-12 | |
|
Glow Wire Ignitability Temperature, 3.0 mm |
750 |
°C |
IEC 60695-2-13 | |
|
Oxygen Index (LOI) |
26 |
% |
ISO 4589 | |
|
WIRE AND CABLE - UL 1581 tested on 2.0mm wire with 0.12mmx20 stranded
copper |
Value | Unit | Standard | |
|
Tensile strength @ break |
16 |
MPa |
UL 1581 | |
|
Tensile elongation @ break |
205 |
% |
UL 1581 | |
|
Tensile strength @ break after 7days @113°C |
17 |
MPa |
UL 1581 | |
|
Tensile elongation @ break after 7days @113°C |
145 |
% |
UL 1581 | |
|
UL temperature rating |
80 |
°C |
UL 1581 | |
|
Heat Deformation at 100°C/250g |
16 |
% |
UL 1581 | |
|
VW-1 |
Pass |
- |
UL 1581 | |
|
Source GMD, last updated:2006/01/12 |
Processing
| Parameter | ||
Wire Coating Extrusion |
Value | Unit |
|
Drying Temperature |
75 - 85 |
°C |
|
Drying Time |
5 - 7 |
hrs |
|
Drying Time (Cumulative) |
12 |
hrs |
|
Maximum Moisture Content |
0.02 |
% |
|
Extruder Length/Diameter Ratio (L/D) |
22:1 to 26:1 |
- |
|
Screw Speed |
15 - 85 |
rpm |
|
Feed Zone Temperature |
180 - 220 |
°C |
|
Middle Zone Temperatures |
220 - 250 |
°C |
|
Head Zone Temperature |
220 - 250 |
°C |
|
Neck Temperature |
220 - 250 |
°C |
|
Cross-head Temperature |
220 - 250 |
°C |
|
Die Temperature |
220 - 250 |
°C |
|
Melt Temperature |
220 - 250 |
°C |
|
Conductor Pre-heat Temperature |
25 - 120 |
°C |
|
Screen Pack |
150 - 100 |
- |
|
Cooling Water Air Gap |
100 - 200 |
mm |
|
Water Bath Temperature |
15 - 60 |
°C |
|
Source GMD, last updated:2006/01/12 |
|
NOTE: Recommended Drying Parameters
are based on usage of Dehumidify Drying / Drying Oven.
|
|
THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION
PURPOSES. |
- Physical properties of related products: WCD993 WCP821U WCA105 WCA875 WCA901 WCP781 WCD861A WCD891B WCP700 WCP761 WCP821 WCP921 WCV063 WCV065 WCV072 WCD851 WCD855 WCD915 WCD771 WCD795 WCD825 WCP921A WCD883 WCD841U WCD835 WCD801AU WCA871A
Correlation search: WCD801A-111 WCD801A-701 WCD801A-BK1066 Noryl WCD801A WCD801A物性 Sabic WCD801A GE WCD801A PPO WCD801A PPO 工程塑料 PPO 樹脂 GE PPO PPO 塑料
廣州華秀塑膠有限公司不僅是專業的Noryl PPO WCD801A原料供應商，亦注重技術支持及全方位的解決方案，提供從材料鑒定、模具設計、成型加工等系列幫助，亦可為客戶量身定制各特殊性能之Noryl PPO WCD801A材料，進而協助客戶提高產品竟?fàn)幜Α?/p>
地址:廣州市天河區中山大道中439號東圃天銀商貿大廈1720-1723室
電話:020-82582555
傳真:020-82523699
Email: [email protected]
Noryl PPO WCD801A報價 >>
常規產品
長纖增強尼龍6 長纖增強PP
長纖增強復合材料 沖擊改性復合尼龍66
沖擊改性復合尼龍6 高強尼龍
沖擊改性復合尼龍 沖擊改性復合材料
改性PP 改性的合金料
高溫改性塑料 含氟聚合物
改性POM 改性PBT
改性PC 焊接用復合塑料
高比重復合塑料 永久防靜電塑料
永久防靜電ABS 永久防靜電合金
永久防靜電POM 其他導電材料
導電尼龍 導電PE,導電PP
高溫導電塑料 導電POM
導電PBT 導電PC
其他非PTFE自潤滑塑料 非PTFE自潤滑PA
非PTFE自潤滑聚苯醚 非PTFE自潤滑PPA
非PTFE自潤滑聚甲醛 非PTFE自潤滑聚碳酸酯
其他潤滑塑料 潤滑尼龍
潤滑烯烴 潤滑PPO(PPE+PS)
耐熱潤滑塑料 潤滑POM
潤滑PBT 潤滑彈性體
潤滑PC 擠出PBT
熱傳導復合塑料 其他PC
EMI/RFI屏蔽復合塑料 預著色非填充樹脂
熱門工程塑膠原料
WBL36L DL002ER D2000 WF306C IF002 DD0009 DE003ER OQ3820 ES003E JF006LXZ DX04489C RF004S OX97635 RCL26 DEP23FXC NORYL™ PPO LEXAN™ PC VALOX™ PBT ULTEM™ PEI CYCOLOY™ PC/ABS XYLEX™ PC/PET XENOY™ PC/PBT/PET Noryl GTX PPE/PA CYCOLAC™ ABS GELOY™ ASA Colorcomp Faradex Konduit Lubricomp Lubriloy Stat-kon Stat-loy Thermocomp Thermotuf Verton